Instructions for using the Pistol Bullshooter

	Step 1. Adjust your bullshootersŪ barrel rest to desired height.  Shooters pad is provided for use under pistol grip. Carefully shoot three rounds aimed at the bullseye to establish your shooting group.
	Step 2. UNLOAD GUN, walk to target.  With a felt marking pen, mark the center of your group of three holes.
	Step 3. Turn your BullshooterŪ around and tighten your gun in the vise.
	Step 4. Raise or lower the BullshooterŪ barrel rest to the height needed and tighten.   Use the front adjusters to position your sights perfectly on the bullseye.   Remove windage and elevation adjustment covers from scope.
	Step 5. Now that your scope's crosshairs are perfectly centered on bullseye, carefully turn scope's adjustment screws until crosshairs are positioned in exact center of your group of three bullet holes.  Be careful!  Don't let the gun, the shooting rest, or the shooting bench move during this operation. Take your time this step is critical!
	Step 6. Turn BullshooterŪ around and test fire at the bullseye. Right on!

It's so easy with the BullshooterŪ!

Important notes:

Put safety first!

Always sight in with the same ammo you will be shooting.

Take your time.

If you have a pistol that throws fire and smoke from the chamber, place a protective material over your BullshooterŪ. This will help keep it looking new forever.

If you not happy with the group you are shooting; check A.  Your scope mounts, B. Clean your barrel/action, C. try another brand or bullet grain.

Have fun - please put safety first.

To clean your BullshooterŪ, use any liquid dish detergent with citrus.

Copyright 1999 OH Products